Question: Alcatel One Touch Pop S3 Won’t Start?

How do you fix a Alcatel One Touch that wont turn on?

Try each of these steps if your device doesn’t turn on.

  1. Verify that your ALCATEL ONETOUCH PIXI 7 has a sufficient charge.
  2. Verify that your device and charging port are not damaged.
  3. Verify that you are using a compatible charger.
  4. Attempt a forced restart of the device.
  5. Attempt a hardware factory reset.

Why is my Alcatel phone not turning on?

Plug the charger to the AC outlet. Regardless whether the phone shows it’s charging or not, leave it connected to its charger for ten minutes. Now, press and hold the volume down button and the power key at the same time for 10 seconds or more but this time while the device is connected to its charger.

How do I force restart my Alcatel One Touch?

Master reset with hardware keys

  1. Back up data on the internal memory.
  2. Turn off the device.
  3. Remove the back cover.
  4. Remove the SIM card.
  5. Wait several seconds then re-install the SIM card and replace the back cover.
  6. Press and hold down the Volume up key and the Power button at the same time until a menu screen appears.

How do I get my Alcatel One Touch to turn on?

Turning the Phone On and Off

  1. Press and hold the Power/Lock key to turn the phone on.
  2. To turn the phone off, press and hold the Power/Lock key.
  3. Tap Power Off.

Why is my phone charging and not turning on?

Check that there’s nothing in your phone’s port, like dust or lint. Plug the charger into a wall outlet. To check that the outlet is working, plug in something else, like a lamp. Check that no accessories, like cases or battery packs, cover your phone’s sensors or press its buttons.

How do you fix a phone that wont turn on?

If your Android phone won’t turn on, one solution is to perform a power cycle. For devices with a removable battery, it’s as easy as taking out the battery, waiting a few seconds, and putting it in again. If you don’t have a removable battery, press and hold the device’s power button for several seconds.

How do I unfreeze my Alcatel flip phone?

Hold volume down + power for about 5 seconds, this restarted the phone. Release buttons when the Alcatel logo appears.

Why is my phone working but the screen is black?

To fix a black screen on an iPhone or Android, the first (and easiest) step is to do a hard reset. This basically entails rebooting the phone’s software. A hard reset can be performed right on your phone, although the process differs depending on what type of device you own.

How do you reset an Alcatel phone?

Press and hold the Power and Volume down buttons. As soon as the device vibrates, release the Power button but continue to hold the Volume down button until the ‘Android Recovery’ menu appears. Select Wipe data/factory reset.

How do you fix a Alcatel One Touch unresponsive screen?

Press and hold the power button and volume UP button (some phones use power button volume Down button) at the same time; Afterwards, release the buttons after an Android icon appears on the screen; Use the volume buttons to choose “wipe data/factory reset” and press the power button to confirm.

How can I turn my Alcatel One Touch on without the power button?

Volume Button

Hold down the volume down key and connect your phone via USB cable to your PC. Keep the volume button held down until you see a boot menu. Select the ‘Start’ option using your volume keys, and your phone will power on.

Where is the power button on an Alcatel phone?

The Go Flip’s power button is the red End Key located near the top right side of the phone’s keypad. Press and hold the End Key to turn your phone on or off. When the battery icon displayed on the screen appears completely full, the battery is fully charged.

How do I know my Alcatel is charging?

The phone is fully charged when the battery indicator, located in the top right corner of the screen, is completely filled.

Where is settings on Alcatel phone?

Select Apps

  1. Select Apps.
  2. Scroll to and select Settings.
  3. Select Wireless & networks.
  4. Select Mobile networks.
  5. Select Access Point Names.
  6. Select the Menu button.
  7. Select Reset to default. Your phone will reset to default Internet and MMS settings. Network problems should be solved at this point.
  8. Select the Menu button.

Leave a Reply

Your email address will not be published. Required fields are marked *