FAQ: How To Open Alcatel Idol 4 Back Cover?

How do I factory reset my Alcatel Idol?

Restore with hard reset or Recovery mode alcatel Idol 4

  1. 1- First turn off your alcatel Idol 4 completely.
  2. 2- Keep holding on volume down and power keys together for a few seconds.
  3. 3- When the alcatel logo is displayed, release the buttons.

How do you take the back off a Alcatel flip phone?


  1. Locate the notch on the bottom left side of the device and lift to remove the back cover.
  2. Lift up on the notch on the top of the battery to remove it from the phone.

Do Alcatel phones have a SIM card?

The SIM card slot is the one on the left. Insert the SIM card. To properly insert the SIM card, place your card with the gold chip part facing down.

How do you change the battery on an Alcatel phone?


  1. If necessary, turn the phone off.
  2. Remove the back cover using the notch located at the bottom edge of the phone.
  3. Align the gold contacts on the battery with the gold contacts in the battery compartment.
  4. Press the battery into place.
  5. Replace the back cover by pressing it onto the phone.

How do I factory reset my Alcatel One Touch Idol 4s Windows 10?

First method:

  1. Firstly, turn off the device by holding the Power key for a few seconds.
  2. After that start pressing Boom + Volume Up + Power buttons together for few moments.
  3. Let go of Boom and Power keys when you see the ALCATEL logo.
  4. Release Volume Up when Recovery Mode appears.
  5. Now choose “wipe data/factory reset“.

Is the Alcatel go flip a good phone?

A Flip Phone for 2019

The Alcatel Go Flip 3 replaces the Sonim XP3 as our Editors’ Choice. It’s a tough call, because while they’re both flips, and both good, they’re different kinds of phones. The Sonim is rugged, super-loud, and super-reliable.

How long does the Alcatel battery last?

Battery Tips

Battery usage data information will be displayed. Note: This device has a Standby time up to 13.2 days, and a Use/Talk time up to 12 hours. For information about charging your battery, see the Charge the Battery tutorial. TURN ON BATTERY SAVER MODE: From the Battery screen, select the Battery-saver switch.

How do I charge my Alcatel flip?

How to charge the battery on Alcatel MyFlip

  1. Insert the cable. Plug the small end of the charging cable into the charging port on the phone.
  2. Plug the charger. After the charger is properly inserted, plug the charger head into an electrical outlet.
  3. Check the indicator.
  4. Wait until the battery is full.

Leave a Reply

Your email address will not be published. Required fields are marked *