If the TV does not connect, you may have to adjust the IP address settings in Network Setup.
Next, power off the TV and unplug the modem and router/access point.
Wait about 30 seconds, plug the modem and router/access point back in, and then power on the TV.
Rerun the Network Test.
How do I reset my Samsung TV to factory settings without a remote?
1 While the TV is On, press and hold the EXIT button on the Samsung remote control for 12 seconds. The standby light should blink the entire time without interruption. 2 The Factory Reset screen displays a warning message. Select OK to reset the TV.
How do I reset my Samsung TV if it wont turn on?
start by trying to reset your TV. Disconnect the power cord from the outlet, then press and hold the power button on the TV (not the remote), for at least 10 seconds. Then wait a few minutes and plug the TV back in and press power once. 2 blinks on Samsung TV’s usually indicates a bad power supply.
How do I reset Netflix on my Samsung TV?
Reset the Smart Hub
- Exit the Smart Hub. You cannot reset the Smart Hub if it is in use.
- Press the Menu button on your remote.
- Navigate to and select the Smart Hub section of the main menu.
- Select Smart Hub Reset. This will remove all downloaded apps!
- Enter your PIN and press Enter.
- Select Smart Hub.
- Try Netflix again.
Photo in the article by “Help smartphone”